Honeywell RTH 7000 Installation Problems - Please Help? - honeywell rth
I'm changing a Totaline P274-0200 to a Honeywell programmable thermostat RTH7000. We have a heat pump.
The code for my son to the old thermostat was:
R - Red
Y/Y2 - Yellow
G - Green
C - Blue
W/W1 - White
S2 - Not used
S1 - Not used
O/W2 - Orange
Y1 - Not used
L - not used
B - Not used
My new thermostat as I cable (heat pump with the guide wire code):
C - Blue (C)
GG - Green (former)
Y - Yellow (formerly Y)
O / B - Orange (former O/W2)
RC - I jumped into the
R - Red (Old R)
For - White (Old W/W1)
E - Not used
L - not used
If clicks air conditioning and cooling should be, which is currently in the heat pump and heat. I also run with the son of orange and white reversed and the matter was closed ... Please help me, I live in Florida ... It's Hot!
Thank you very much!
1 comment:
Check the instructions for the switching valve function (orange).
Have energy Totaline TSTAT the reversing valve for cooling and Honeywell to do the same. Probably just a timing adjustment.
Post a Comment